Kokoelma: Mila International

• Designed to provide quality biopsies by capturing and retaining the bone marrow in the needle WITHOUT ALTERING THE SAMPLE.
• System includes Jamshidi style biopsy needle,obturator pushing rod, probe guide and luer lock cap.
• Needle point allows for easy penetration into the marrow cavity.
• Marked obturator rod indicates length of specimen prior to extraction and can be used to expel specimen from the extraction cannula.
• Luer lock connection for syringe.

  MILA Bone Marrow Biopsy Video

• Designed to provide intraosseous access; and quality fluid aspirates.
• Triple sharpened tip to allow a non-traumatic; fast penetration into the bone marrow cavity.
• Adjustable depth guard to help control depth during needle insertion.
• Luer lock connection for syringe.

Bone Marrow Biopsy Video

• Double T
• Mini bore
• Nano bore
• Pressure monitoring
• Small bore
• Y extension

• 360° spinning luer lock hub resists twisting and kinking of the catheter during horse movement.
• Helps prevent catheter disconnects by allowing the extension line to spin freely 360° when connected to a catheter. Avoids accidental unscrewing.
• Easily position the extension set dorsal or ventral to allow catheter wings to lay flat against the horse for improved stabilization.
• Item number 8585M features the 360° spinning luer lock hub and stasis valve.

Spinner Luer Lock Demonstration

NEUTRAL DISPLACEMENT INJECTION PORT (STASIS VALVE)

• The neutral displacement injection port (stasis valve) prevents blood reflux into the catheter when connecting and disconnecting syringes/lines.
• Needle-free, Swabable, Clear.
• Does not require clamping to control valve induced reflux.
• Closed, needle free valve with a flat, swabable top for easy disinfecting.
• Saline flush option reduces risk, cost, and time associated with Heparin use. Heparin not required.
• Higher flow rate than Microclave.
• Included in item numbers 8570M, 8573M, 8574M, 8576M, 8577M, 8585M, 8586M AND 8587M.

WARNING: Do not insert needles or blunt cannulas into the valve port. Do not use a needle port connected to the needle-free valve.

 MILA Stasis Clear Nuetral Displacement Port Video

 MICROCLAVE

• One piece, closed, needle-free connector. 
• Approved for saline flush.  Heparin not required.
• Included in item numbers MC40, MC43, MC44.

NORMALLY CLOSED VALVE

• The valve is needle-free and bi-directional for infusion and sampling.
• Small bore tubing.
• Can be capped or connect to an IV line
• Included in item numbers 8570 and 8585.

FEMALE LUER & ROTATING MALE LUER LOCK

• Small bore, mini bore, and pressure tubing with female luer.
• Rotating male luer lock.
• Can be capped or connected to an IV line.
• Included in item numbers 8540, 8540, 8544, 8545, 8671
• Small bore, mini bore, and pressure tubing with female luer.
• Rotating male luer lock.
• Can be capped or connected to an IV line.
• Included in item numbers 8540, 8540, 8544, 8545, 8671

Needle Free Connector Protocol Video

• 360° spinning luer lock hub resists twisting and kinking of the catheter during horse movement.
• Helps prevent catheter disconnects by allowing the extension line to spin freely 360° when connected to a catheter. Avoids accidental unscrewing.
• Allows extension set to attach catheter in any position while leaving the suture wings to lay flat against the patient.
• Item numbers 8518 and 8590 feature the 360° spinning luer lock hub.
• Item numbers 8518M, 8530M, 8550M, 8572M, 8575M and 8590M feature the stasis valve and the 360° spinning luer lock hub. (SEE WARNING BELOW REGARDING STASIS VALVE)
• Item numbers 8700 and 8718 feature a large bore female luer and 360° spinning luer lock hub.

MILA 360° Spinner Video

NEUTRAL DISPLACEMENT INJECTION PORT (STASIS VALVE)

• Prevents blood reflux into the catheter when connecting and disconnecting syringes/lines.
• Clear, closed, NEEDLE-FREE valve with a swabable top for easy disinfecting.
• Does not require clamping to control valve induced reflux.
• Saline flush option reduces risk, cost, and time associated with Heparin use.
• Heparin not required.
• Higher flow rate than Microclave.
• Item numbers 8518M, 8530M, 8550M, 8572M, 8575M and 8590M feature the stasis valve.

MILA Stasis Clear Neutral Displacement Port Video

WARNING: Do not insert needles or blunt cannulas into the valve port. Do not use a needle port connected to the needle-free valve.

NORMALLY CLOSED VALVE

• The valve is needle-free and bi-directional for infusion and sampling.
• High-flow tubing.
• Select caps connect to an IV line.
• Included in item numbers 8518, 8572, 8575 and 8590 feature the normally closed valve.

LARGE BORE FEMALE LUER

• Large bore, female luer.
• Included in item numbers 8700 and 8718

ROTATING MALE LUER LOCK

• Large bore.
• Included in item numbers 8572, 8575, 8572M, 8575M feature the rotating male luer lock.

(SEE WARNING ABOVE REGARDING STASIS VALVE)

MILA Needle Free Connector Video

• Quality smooth transition from needle to catheter reduces burring and wasted sticks.
• Introcan® Safety™ radiopaque polyurethane catheters feature a safety clip that automatically covers the needle point when it is withdrawn, reducing accidental needle sticks.
• Push-off plate on hub for smooth insertion.
• Guarded flashback chamber.

• Smooth transition from needle to catheter reduces burring and wasted sticks.
• Superior needle sharpness reduces tissue trauma and pain.
• Clear, large volume CLOSED chamber allows for adequate and immediate indication of vessel entry.
• Radiopaque teflon material.
• Filter vent plug prevents blood loss during insertion and can also be used to temporarily cap the IV catheter prior to securing an extension set.

• Teflon, radiopaque catheter-over-needle.
• Recommended for less than 24 hour use.
• No suture wings.

• 99.99% protection against aerosols and vapors. 
• Low residual.
• Multi-use with drip- free connector.
• Vented with dual pathway non-coring plastic spike and pressure equalization with 0.2 micron one way filter. 
• Universal design that supports virtually all vial sizes and types: 13, 20 and 28.
• 0.10ml Priming volume.

• Save time and money.
• Puncture bag stopper or vial only once for multiple withdrawls or injections.
• All are needle- free.  Operate with any syringe.
• PIN1 clamps onto the vial, eliminates pulling against a vacuum, and extends the life of the vial medication because all incoming air is filtered.
• Use on 20mm and 28mm vials.
• PIN3 greatly speeds up the process of filling syringes from a bag.  The bag is punctured only once with the spike, thereby extending the life of the fluids by withdrawing from the bag through the needle- free adapter, rather than through a needle.

Vented Vial Adapter

• Pin 13, 20, and 28 are vented vial adapter pins.
• 99.9% protection against aerosols and vapors.
• Low-residual.
• Multi-use with drip-free connector.
• Vented with dual pathway non-coring plastic spike and pressure equalization with 0.2 micron one way filter.
• 0.10ml priming volume.

MILA Dispensing Pins Video

 Guidewire introduction. Made of PTFEm with flexible suture wing. Includes 22Ga needle; wire; and catheter.

• Emergency delivery of fluid, medications and blood products, directly into the vascular system within seconds, via bone marrow.
• Reusable stainless steel two-part needle.  Solid sharp inner cannula.  Consists of outer cannula with depth marks and forked tip.
• Easy access for bone marrow aspiration.
• Very gentle. No bone splintering as with competitive systems.
  
• Training needles are non-sterile. Sterilize with cold sterilant, autoclave or EO gas.
• Power driver has lithium sealed battery. 

MILA EZI0 Placement Video

EZIO Brochure

• PICC - Peripherally Inserted Central Catheter.
• May be inserted in any vessel.
• Silicone material for long term use of 30+ days.
• Radiopaque catheter can be cut to desired length.
• Insertion method via peel away introducer.
• Catheter has a stylet wire to facilitate advancement.
• Kit includes catheter with wire stylet, peel-away introducer and tape measure.

MILA PICC (Peripherally Inserted Central Catheter) Placement Video

• Kit includes catheter-over-needle introducer, a long catheter with stiffening wire and a drum.
• The drum houses the long catheter and is an advancement system designed to minimize touch contamination.
• Introduction technique:  Long catheter through introducer catheter.
• The INTRODUCER CATHETER REMAINS INDWELLING and the long catheter hub locks onto the introducer catheter hub. Since the introducer catheter remains indwelling, the long catheter can be easily replaced through the same introducer, avoiding another needle stick.
• Long catheter material is radiopaque kink-resistant polyurethane, embedded with a fluoro-polymer formula designed to aid in ease of placement.
• Pick & Peel Drape (#PPD - $5.00) recommended for sterile field.

  Uses:

1. Administer vasopressor (i.e. norepinephrine ) when a central line is not accessible. Feed the long catheter through the peripheral catheter. The peripheral catheter is included in the kit to ensure that its inner diameter is sufficient for a smooth introduction of the long catheter.
2. Drug administration to crashing diabetic patient.
3. Multiple blood draws.

 Drum Long Line Catheter Instructional Video

INJECTION PORTS:

#8200 -Neutral Displacement Injection Port (Stasis Valve):  

• Prevents blood reflux into the catheter. Does not require clamping to control valve induced reflux. Higher flow rate than the Microclave.
• Stasis Clear Neutral Displacement Injection Port PREVENTS BLOOD REFLUX into the catheter tip when disconnecting the syringe or line.
• Needle-Free, Swabable.
• CLAMPING IS NOT REQUIRED.
• SA LINE FLUSH option reduces risk, cost and time associated with Heparin use
• Highly recommended to replace all previous style “bungs,” “prn ports” and “older model injection ports.”
• HIGHER FLOW RATE than previous ports.
• Used in all CVC kits.

#8098 - MicroClave:

• MicroClave is a one piece, closed, needle-free connector.  Labeled for saline flush.  Heparin not required.

#8095 - Bi-Directional Injection Port

• Bi-Directional Injection Port is needle-free for direct attachment of an IV line or syringe.  Includes a tethered cap (8090).

#8080 - Safety Injection Port

• Safety Injection Port has a built-in stop to prevent accidental tubing or technician puncture.

Needle Free Connector Protocol Video

CAPS & FEMALE LUERS:

#8090 - Tethered cap

• Tethered cap attaches to the catheter or extension hub to cover the injection port. Not for needle-free valves.

#8099 - Stemless Luer Lock Cap

• Stemless Luer Lock Cap - 10 pack, non-sterile. Universal, works with all injection ports.

• Facilitate the placement of catheters and tubing with these high quality introducers.
• They peel apart cleanly after introduction.
• Use in MILA long term catheter kits and PICC kits.