• ProO2 5 LPM Happirikastin 230 Volt
  • ProO2 5 LPM Happirikastin 230 Volt
  • ProO2 5 LPM Happirikastin 230 Volt
  • ProO2 5 LPM Happirikastin 230 Volt
  • ProO2 5 LPM Happirikastin 230 Volt
  • ProO2 5 LPM Happirikastin 230 Volt

ProO2 5 LPM Happirikastin 230 Volt

Hinnat alv 0%

Normaalihinta 840,00€
Normaalihinta Myyntihinta 840,00€
Alennusmyynti Loppuunmyyty

Pro O2 LLC

Tuotekoodi:

Lisävarusteet

Valitse alta haluamasi varusteet. Tämän jälkeen lisää päätuote normaalisti ostoskoriin.
Letkuliitin virtausmittarille, muovi
Letkuliitin virtausmittarille, muovi
6,98€
Air Intake Filter NuvoLite
Air Intake Filter NuvoLite
11,50€
ProO2 Filter Cabinet Inlet
ProO2 Filter Cabinet Inlet
5,84€
Kirkas vesiletku (pvc) 5,0 mm / 8,2
Kirkas vesiletku (pvc) 5,0 mm / 8,2
2,40€

ProO2 5LPM happirikastin 230 voltin

  • 5LPM, 230 V, 50 Hz, 300 wattia
  • Koko: 36 cm x 23 cm x 58,5 cm
  • Paino: 14,5 kg

Valmistettu kevyestä mutta kestävästä termoplastisesta kotelosta, johon mahtuu happirikastimen komponentit ja laitteisto, haittaamatta kuitenkaan koko laitteen liikkuvuutta tai kätevyyttä. Kotelossa on myös liekinkestävä ominaisuus, joka on sisällytetty muoviin lisäturvallisuusominaisuutena.

  • Pro-sarjan laitteet kykenevät saavuttamaan virtausnopeudet välillä: 0.125 - 5.0 litraa minuutissa (LPM).
  • Pro-sarjan puhdistetun hapen pitoisuus on 90,0% (+ 5,6 / - 3,0).
  • Näiden laitteiden varastointilämpötila on -20 - 60 Celsius-astetta.
  • Koneiden toimintaan vaadittava ympäristön lämpötila on 5 - 40 Celsius-astetta.
  • Käyttö näiden lämpötilojen ulkopuolella mahdollistaa puhdistetun hapen tuotannon, mutta alentaa koneen säilyvyysaikaa sekä hapen kokonaistuotantoa ja puhtausastetta.
  • Keskisähkönkulutus: 300 Wattia
  • Nelipyöräinen
  • Kantokahva helpompaan siirtelyyn

Conceived to provide high quality oxygen generation by integrating proven design concepts with the insight gained from over 30 years of producing superior oxygen concentrators, the Pro Series of Oxygen Concentrators aims to exceed the needs and demands of the Non-Medical realm of oxygen usage. A reimagined, compact, and highly mobile machine, this family demonstrates that it can stand and deliver a high-quality concentration of Oxygen in an affordable yet sleek layout.

Whatever the requirements may be, Pro O2 has a machine that can achieve the fulfillment of those goals.

Produced in a lightweight yet tough thermoplastic cabinet to accommodate the components and machinery of the concentrator, while not hindering mobility or convenience of the overall unit. Cabinet also has a flame retardant incorporated into the plastic as an added safety feature. Plastic Composition of the cabinets are as follows:

  • With an easy interface and ease of operation, these devices are made to be as simple as possible. The Pro 5 has an Oxygen flow rate knob that is marked, and comes with 12 distinct flow settings, to allow for accurate Oxygen generation for the needs at hand.
  • The Pro family of machines is designed for easy, low-maintenance service. The hour meter is visible on the outside of the machine, and the dual filters are both readily accessible on the back on unit.
  • Has a spring-mounted Thomas Compressor to aid in a reduction of both vibration and overall sound of the running machine. The compressor makes use of a 50 PSI Pressure Relief Valve as well as a Thermal Switch that will activate automatically and turn off the compressor if the compressor’s temperature meets or exceeds 293 degrees Fahrenheit (165 degrees Celsius) during operation.
  • Enriched Oxygen is provided by Rapid Pressure Swing Adsorption (RPSA) through two tubes of molecular sieve, which are intermittently timed to provide continuous oxygen.
  • Outlet Pressure for the Pro Family: 7.0 PSI / 0.483 Bar / 0.477 ATM

 *Pressure rate for the Oxygen output is controlled by the internal 2-way Regulator.

  • Makes use of an Oxygen Content Sensor Indicator (OCSI) that comes standard on the Circuit Board. The purified Oxygen passes through a chamber that measures the concentration of the gas via ultrasonic waves, and will notify via both visual and auditory aids if that purity were to drop below the threshold of 83% purified O2.
  • Utilizes a resettable Circuit Breaker to protect the circuitry from damage in the event of a short circuit or power overload. 5-amp Breakers used on all 115 Volt Models, and 10-amp Breakers on the 230 Volt Models.
  • The Pro 5 machine has a barbed Oxygen outlet fitting to ensure a secure connection to the outlet and prevent accidental disconnecting.
  • The outer filter of the machine can be washed with warm water to remove dust and other foreign materials caught in it; doing so regularly not only increases the purity of the oxygen generated, but also increases the longevity of the machine overall.
  • Comes with numerous safety features, such as an auditory alarm in the event of Loss of Power, High/Low Pressure, overall process failure, and if purity falls below a certain point. This is also accompanied by a solid red LED light to alert the user that there is a problem.

Viimeksi katsomasi