Kokoelma: Anestesiakoneet ja varaosat

Our Best-Selling Wall Mount Model Save space with the M2300 wall-mount unit. This best-selling model is an ideal solution for station work, such as radiology, or for use in dental areas where a floor stand machine is too much.

• Proven unidirectional valve design
• Quick disconnect common gas outlet
• 0-4 Lpm O2 flowmeter with mechanical stop flow control
• Oxygen flush with safety restrictor
• Mounts on 16″ centers
• Quick disconnect common outlet
• Quick-change “One Seal” canister.

Safety Valve

Lataa turvaventtiiliesite 1

Lataa turvaventtiiliesite 2

Videot

Anestesiakone

Turvaventtiili

Huom! Hintaan ei kuulu happisäiliöt eikä haihdutin

Safety Features & Portability in a Basic Floor Stand Model. The M1200 has the core features you want in a rebreathing anesthesia machine, plus additional safety features usually offered only in more expensive models. The M1200 is economical to purchase and operate and is ideal for smaller patients and quick procedures.

Note: Shown with optional Isoflurane Vaporizer & E-Tank

Safety Valve

Lataa turvaventtiiliesite 1

Lataa turvaventtiiliesite 2

Videot

Anestesiakone

Turvaventtiili

Our Best-Selling Table Top ModelSmall, but mighty, the M4000 is our most compact rebreathing anesthesia machine. It is the perfect solution for table top or wet table locations where floor space is minimal. For mobile applications, it can also be mounted to a cart.

• Proven unidirectional valve design
• Quick disconnect common gas outlet
• 0-4 LPM O2 flow meter with mechanical stop flow control
• Oxygen flush with industry standard 30 LPM safety restrictor
• Dual O2 supply ready with check valves
• Quick-change “One Seal” canister

Safety Valve

Lataa turvaventtiiliesite 1

Lataa turvaventtiiliesite 2

Videot

Anestesiakone

Turvaventtiili

Our Best-Selling Portable Model Extremely compact and versatile, the M3000 is widely used for rodents and other small animals of up to 15 lbs. While this compact machine takes up less than one square foot of table space and is light enough to carry between treatment areas, it offers excellent safety for your patients and convenience for you.

HAIHDUTIN EI KUULU SETTIIN.

• Small footprint-less than one square foot
• Easy carry handle
• Easy to clean powder coating
• 0-4 LPM O2 flow meter with mechanical stop flow control
• Other carrier gas and LPM range flow meters available upon request
• Oxygen flush with industry standard 30 LPM safety restrictor
• Compatible with any vaporizer
• Quick disconnect common outlet

Safest and Most Efficient Articulating Wall Mount Anesthesia Machine. The M2500 offers all the advantages of the M2300, but also has a built-in articulating arm. The arm offers a full 180° movement, making it an excellent choice for station work and providing flexibility of use in multiple wet and dry table islands.

• Articulating arm extends up to 28 inches from the wall
• Proven unidirectional valve design
• Quick disconnect common gas outlet
• 0-4 Lpm O2 flowmeter with mechanical stop flow control
• Oxygen flush with safety restrictor
• Mounts on standard 16″ centers
• Quick-change “One Seal” canister

Safety Valve

Lataa esite 1

Lataa esite 2

Videot

Anestesiakone

Turvaventtiili

Safe and accurate delivery of anesthetic gas for all your animal subjects. Our vaporizers deliver a very fine, highly accurate, and consistent dose of Isoflurane or Sevoflurane to the anesthesia machine.

• 250cc Liquid anesthetic capacity- nearly twice as much as other vaporizers
• Flow-rate and temperature compensation device
• Constructed of high grade steel and brass with precision manufacture unequaled in the industry
• Three year warranty
• Available for use with Isoflurane and Sevoflurane, and with funnel and key fill (pin index) options
• Anti-Spill devices available

Huolto

Manufacturer recommendations on cleaning and calibration of your vaporizer will be specified upon purchase. Cleaning and calibration must be performed in a sterile environment and not in the field by a service technician.

 tec3, MSS, Vaponizer

Safety Pressure Relief Valve: A Revolutionary Advance in Anesthesia Safety. This patented pressure relief valve virtually eliminates the danger of over-inflating a patient's lungs. With just a press of the ventilation button, you can instantly restrict the pressure to a safe level, while effectively ventilating the patient.

• Normal pressure relief at 20-25 cmH2O using ventilation button
• Less than 1cmH2O pressure at full open
• Less than 2cmH2O pressure at full closed
• Replaces any valve with 3/4-20thread (the industry standard thread size)
• Proven life saving patented design
• 19mm hose connection
• 20-25cmH2O pop-off pressure
• Can be used with a ventilator

Safety Valve

Lataa turvaventtiiliesite 1

Lataa turvaventtiiliesite 2

Videot

Turvaventtiili

Aktiivihiilisuodatin 800g anestesiakaasupoistoon.

The Sigma Delta vaporizer delivers accurate concentrations under varying conditions of flow rate and temperature, particularly at low flow.

• Superb performance, particularly at low flow
• Low body weight

Liikuteltava anestesiakone sisältää:

• Anestesiakoneen (M2300)
• Happirikastimen (725)
• Isofluraanihaihduttimen (MSSVAP02)
• Taustalevyn anestesiakoneelle (50548)
• Isofluraanin täyttöletkun (2012-0000)
• Anestesiavaunun (56203)

Anestesiakoneen ja isofluraanihaihduttimen valmistaja Superavet

Anestesiavaunun valmistaja Fysioline Production

Happirikastimen valmistaja Pro O2 LLC

Anestesiakone

• Proven unidirectional valve design
• Quick disconnect common gas outlet
• 0-4 LPM O2 flow meter with mechanical stop flow control
• Oxygen flush with industry standard 30 LPM safety restrictor
• Dual O2 supply ready with check valves
• Quick-change “One Seal” canister

Lisätietoja täältä

Happirikastin

ProO2 5LPM Oxygen Concentrator 230 Volt

• 5LPM, 230 V, 50Hz, 300 Watts
• Size: 36 cm x 23 cm x 58,5 cm
• Weight: 14,5 kg

Produced in a lightweight yet tough thermoplastic cabinet to accommodate the components and machinery of the concentrator, while not hindering mobility or convenience of the overall unit. Cabinet also has a flame retardant incorporated into the plastic as an added safety feature. 

• The Pro Family of units are capable of achieving flow rates between: 0.125 – 5.0 Liters per Minute (LPM).
• Concentration of the Pro Family is in the range of 90.0% (+ 5.6/ – 3.0) of purified Oxygen.
• Storage temperature for these units are between -4 to 140 degrees Fahrenheit (-20 to 60 degrees Celsius).
• Ambient air temperature for operation of the machines are in the range of 41 to 104 degrees Fahrenheit, or 5 to 40 degrees Celsius. Operating outside of these temperatures will still allow for purified Oxygen production, but will lower the shelf life of machine as well as the overall production and purity of Oxygen content.
• The Pro Series is available in both 115 Volt/ 60 Hertz and 230 Volt/ 50 Hertz configurations, to allow for use worldwide.

Lisätietoja täältä

Isofluraani

Safe and accurate delivery of anesthetic gas for all your animal subjects. Our vaporizers deliver a very fine, highly accurate, and consistent dose of Isoflurane or Sevoflurane to the anesthesia machine.

• 250cc Liquid anesthetic capacity- nearly twice as much as other vaporizers
• Flow-rate and temperature compensation device
• Constructed of high grade steel and brass with precision manufacture unequaled in the industry
• Three year warranty
• Available for use with Isoflurane and Sevoflurane, and with funnel and key fill (pin index) options
• Anti-Spill devices available

Lisätietoja täältä

Isofluraanihaihdutin Tec 3 MSS3 ISO K/F CMT täyttöletku anestesiakoneeseen

• Rodents 
  
• Made of plexiglass 
  
• With hose and connector 
  
• Dimensions (in cm): L 19 x W 14 x H 10