Now incorporates alerts and alarms for ventilation status • Patient disconnect • Over-pressure • Apnoea • Valve disconnect or failure
Measurement of inspiratory time and respiratory rate
Select-and-commit entry to prevent false changes
Easy and intuitive to use
Compact, rugged unit
Internal battery for portable/mobile use
Clear, bright visual display
Designed and manufactured in the UK
Safe, simple, pressurecycled ventilation for small animals
The SAV04 is an enhanced version of the long-standing SAV03 ventilator and uses the same principles of simple, pressure-cycled ventilation.
In the redevelopment of the ventilator, features have been added to improve patient control and to improve ventilation status feedback. For example, there is now an automatic over-pressure alarm that will sound if the target pressure is exceeded by 8cm. There is also an alarm if the patient becomes disconnected from the ventilator, or if no back-pressure is detected during the inspiratory phase.
These alarms are designed to be informative and are accompanied by explanatory text on the main screen. In addition, an audible beep is produced on every successful breath. Both this beep and the alarm beeps can be individually silenced if required. There is a new valve design to accompany the new ventilator and this has two major benefits.
Firstly, the valve can be automatically zeroed on any other SAV04 machine allowing valves to be swapped or replaced easily.
Secondly, a larger orifice in the exit port of the valve means the port can now support larger animals. The 12mm diameter exit orifice will now allow unrestricted expiration in animals up to 40kg.
It must be remembered the principle of operation is still based around a T-piece, so proportionately higher fresh gas flow rates will be required. However, with the advent of oxygen generators, running such a system on 8-10L is feasible for short-term or emergency use. The new display now provides more information to the user. A central rising bar graph shows the pressure in the patient’s airway, enabling quick assessments to be made on system and/or ET tube leaks. Each inspiratory period is now measured and displayed on the screen as is the measured respiratory rate.
The new SAV04 provides a simple, yet safe, way to ventilate your smaller, most vulnerable patients.
1 x EN-AC-FG-C203 Aluminium Flight case 1 x ESA24-09-01 Vetronic Medical Devices Mains Charger 9v 1 x Operating Manual 1 x Quick guide 1 x Information sheet “Using the low dead space kit” 1 x CD with files 1 x VS0031 Extension Tubing Kit 1 x VS0032 Low Dead Space Kit 1 x VS0034 Connection Tubing Kit for SAV04
170mm x 170mm x 95mm
Anodised aluminium case with rubber end protectors
9volt DC, 2amp universal input charger
Rear panel fuse rating:
Domestic animals 10g up to 12kg in weight (up to 40kg with high flow rates)
Anaesthetic apparatus configuration:
T-piece with fresh gas and anaesthetic agent in a non-rebreathing circuit
Mode of operation:
IPPV by outlet occlusion. Pressure-cycled/pressure limited device
Preset trigger range:
1-60 centimetres water pressure
1 centimentres water pressure
Expiratory phase range:
0.1 to 60 seconds
Respiratory rate range:
1 to 120 breaths/minute (depending on inspiratory fresh gas flow rate)
Vetronicin Lightning - valvontamonitori on modulaarinen, joten siihen on mahdollista liittää myös myöhemmin lisää ominaisuuksia.
Lightning on liitettävissä tietokoneeseen, jolloin siitä tallentuu pdf.-muotoinen anestesiapöytäkirja.
Lightniin kuuluu (mukaan lukien pyydetyt moduulit): 1 x EN-AC-FG-A022 Transit -alumiinilaitteiden lentokotelo 1 x Lightning “pikaopas” 1 x CD tiedostoilla 1 x VS0450 USB-tikku 1 x ESA24-09-01 Vetronic Medical Devices -virtalaturi 9v 1 x VS0130 USB 2.0 A-uros-B-uroskaapeli, 2m
ICON helpottaa elämää varmistamalla happirikastimesta saatavan hapen pitoisuuden. Yksinkertainen kytkentä sisäänhengityksen ulostuloon.
ICON In Circuit Oxygen aNalyser • Simple to use • Use with Oxygen concentrators • Measure Fresh Gas Outlet or circle concentrations • Very long battery life • Very long sensor life • Simple to re-calibrate
Icon is a new in-circuit oxygen monitor designed for use in veterinary operating theatres and intensive care wards. The Icon unit can be placed on the Fresh Gas Outlet of an anaesthetic machine or within the rebreathing limbs of a circle system, wherever the oxygen concentration needs to be known. The Icon unit uses a single AA battery that has a lifetime of approximately 1 year when used for 8 hours a day every day. The sensing element is a longlife galvanic sensor that has a working life of approximately 2 years.