Kokoelma: Klinikkatarvikkeet

SH9100 Shoe Mounting Kit

One for each cage or run.

Reusable shoe and tubing tab/clips hold the swivel device and primary I.V. set tubing to the top of the cage. The shoe and tubing tab/clips have adhesive backing for permanent attachment to the top of the cage. Primary I.V. set tubing and Flex-Coil® Swivel device are snapped into place during in-cage I.V. treatment.

SRR9000 Swivel Run Rod

Adjustable length, portable, 1” diameter tension rod with attached Shoe Mount and tubing clips for use in runs. Rod with shoe suspends the Flex-coil® Swivel Set above and out of reach of the patient at the center of the run and enables the patient to move freely without kinking, twisting or damaging the coil. The rod can be mounted on steel or masonry walls, chain-link fencing, and horizontal or vertical rod side walls. Swivel Run Rods are made to order to best fit your runs (call us for details).

FRR9030 Fluid Run Rod

Adjustable length, portable, 1” diameter tension rod for use in runs with two (2) movable fluid container hooks and tubing clip. Rod enables fluids to be suspended above and out of reach of the patient. The rod can be mounted on solid steel or masonry walls, chain-link fencing, and horizontal or vertical rod side walls. Fluid Run Rods are made to order to best fit your runs (call us for details).

AJI5008T Arthroscopy – Joint Irrigation Set with 1 Fluid Container

Sterile, disposable, 8 foot (96 inch) large bore tubing set with a non-vented fluid container spike, on/off cross clamp, and distal rotating SPIN-LOCK™ male Luer connector for rapid joint irrigation or fluid irrigation during arthroscopy. Set packaged in Tyvek® bag.

IG5002 Uterine Irrigation Set

Sterile, disposable, 42 inch large bore tubing irrigation set with on/off clamp, a bag spike on one end, and catheter tip (tapered) connector on the distal end. Distal tapered end connects to a Foley catheter for mare uterine irrigation.

IWIN30 IWIN’S 30″ Extension Set

Sterile, disposable, 30 inch extension set with an on/off clamp.

Bag Administration with Filter:

• Standard Bore Tubing.
• Ideal for use to draw and filter blood from a bag into a syringe. 
• Connect to MILA Automatic 3-way set to make a completely closed, automatic, RAPID delivery system. Refer to Pigott study on using a closed system for collection and administration of autotransfusion in a dog with traumatic hemothorax.
• Set includes non-vented spike, tubing, pinch clamp, 200 micron blood filter and female luer lock.  Total length 47cm(18in).
• Priming volume is 3ml.
• Filtration Area: 16 square centimeters.
• Volume limit depends on a variety of factors such as blood density and transfusion pressure.

• Standard Bore Tubing.
• Ideal for use to filter and administer blood from a syringe.
• Set includes female luer, tubing, 200 micron blood filter, pinch clamp and SPINNER luer lock.  Total length 43cm (17in).
• Priming Volume is 4ml.
• Filtration Area: 16 square centimeters.
• Volume limit depends on a variety of factors such as blood density and transfusion pressure.

• Large bore tubing for HIGH FLOW blood administration.
• Ideal in large animal applications to administer and filter blood from a bag.
• Set includes spike, drip chamber, tubing, roller clamp, 200 micron blood filter, needle-free injection port and SPINNER luer lock.  Total length 203cm(80in).
• Flow rates can be increased using pressurization (Item #AF48).  Gravity flow rates using simulated blood:

                No Catheter: = 710ml/min

                14Ga x 5.25inch Catheter = 180ml/min

                12Ga x 5.25inch Catheter = 375ml/min

                10Ga x 5.25inch Catheter = 475ml/min

• Priming volume is 36ml.
• Filtration Area: 16 square centimeters.
• Volume limit depends on a variety of factors such as blood density and transfusion pressure.

MILA BF200-2 Video

• Three-Way Stopcock with Luer Slip; Luer Lock; 8 inch Extension; or Needle Free Valve

For Automatic 3-Way; see "Centesis Valve" or "Automatic 3-Way"

• For collection of a STERILE sample.
• An inert capsule protects the inner tube while advancing through the nostril.
• Tube within a tube style.
• Outer tube has a smooth atraumatic distal end.
• After advancing, the capsule is pushed out by the inner tube and dissolves.
• Swab area for sample, then retract inner tube into the outer tube before withdrawing all from the nostril.
• Kit includes swab, gloves and scissors.
• Length =62.5cm(25in) OD = 23Fr

Provide continuous localized infusion of antibiotics directly into the affected joint.

Septic Joint Treatment with Constant Intra-articular Infusion of Gentamicin orAmikacin

Stephen B. Adams, DVM, MS and Timothy B. Lescun, BVSc

• High flow collection set that attaches directly to venous catheter and vacutainer bottle.
• Set includes 72in (180cm) large bore tubing; injection site; drip chamber; and spin luer lock.
• Priming Volume = 42ml.

High performance pressure infusor delivers a continuous "squeeze" to the IV fluid bag.

• Provides easy view of fluid bag and fluid level.
• Special built-in hook allows fluid bag to be replaced without removing pressure infusor from hanging device.

Bag and Bottle Pressurization Kit 

• T-shaped spike with 48cm (19in) extension set, female luer, air filter and check valve.
• Increases flow rate of an IV or blood set by pumping FILTERED AIR into the bag or bottle.
• Allows medication administration into, and fluid withdrawl from the bag or bottle.

NEW:  Medication Bag Cover-Item UVB-B

• Amber colored bag provides protection for light sensitive liquid medications.
• Fits over a 1000ml medication bag.
• Non-Sterile.
• 10 per pack.

Clear Cuff Pressure Infusor Demo Video

Easily adjust infusion rate from 10ml/hour up to 350ml/hour when used with gravity system. When used with pressurized system; flow is four times faster. Tube length is 18in (45cm).

Deliver a small amount of medication quickly. This set allows pressurization when used with squeeze bulb (Item #175590) of a bag or bottle. Tube length is 23in (58cm) - Priming volume is 4ml.

Includes spike, 10 feet of tubing, clamp and spin luer lock.

High flow infusion set includes spike; 10 feet of tubing (300cm); clamp; and spin luer lock. Fits basic peristaltic pump. Priming Volume = 48ml.

Large bore 30Fr x 300cm (120in) non-vented Y-set with 2 spikes, 3 clamps, roller flow adjustment, and spin luer lock adapter.

• Economical large bore 30Fr x 300cm (120in).
• Non-vented Y set with 2 spikes; 3 clamps; roller flow adjustment; and spin luer lock.
• Needle free injection port.
• Priming Volume = 110ml - 15 drops per/ml.